New to me m151a2
Moderators: rickf, raymond, Mr. Recovery
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
Well time to start the real dirty work. Yesterday the muffler came out and the rear wiring harness then another 4 hours off and on of degreasing the drive line and pressure washing. Now its time to either blast her or sand and strip cant decide which one to do yet. As you can see from the pictures the mutt rolled off the factory 24087 then the army painted the visible parts of the body 4 color camo. So I plan to do the same the original 24087 is in pretty good shape and there is almost no rust on the under side of the mutt all suspension parts still have the factory black paint so that's a easy repaint really the worst paint is up top. Well free time and money will make my decision for me on how to strip the body of the old paint. Of course the battery compartment needs to be sand blasted so I can do the final metal repair.
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
Re: New to me m151a2
If the underneath looks as good as those pictures you have it made! Are all those other vehicles laying around your toys also?
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
LOL no not all my toys. Im rebuilding the jeep at a local museum here in Houston and those belong to members and the museum.
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
Re: New to me m151a2
Ahhh, bummer. I had my eye on that ambulance in the back of the first pic!
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
Well after splitting my free time between getting another mutt up and running some trips out of town and life in general I got to spend a few hours this Sunday on the battery compartment. Like all good intentions the just cut out the small hole in the floor and replace turned into a 6 inch long hole cutting out the front bulkhead and some of the back bulk head. I will be making a call to the m151 body parts god for a new front bulk head this week and hitting up the local Northern tool for a spot weld cutter and a sand blaster to blast the battery compartment before the new metal goes in. You can also see int he first picture the nice gut that decided to add drain hole with a screwdriver lol oh the things people do
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
Well on July 3 I had the opportunity to have the mutt blasted so I took it. I was not completely ready as I was still working on replacing metal in the battery compartment but when good weather and the sand blaster man is available you have to take it. It was a very hard day as the sand blaster man did not start till 10:30am by the time he was done and I started laying primer is was 1:30pm and the 103 degree heat index was a killer. I moved the Mutt into the shade and started by the time I was done it was 6:00pm the paint gun felt like it wade 100 lbs and I was soaked and dead.
There were only a couple hidden gems found after the sand blast. 1: Someone had taken a grinder to the side of the hood where the hood numbers normally go. This was more than likely done by the army as the area had good military paint. This left nice grinder marks and for some reason what looks like a hole that had been repaired.
2: Cancer on the passenger front motor mount the cancer is about 6 inches or more above the mount. some little pin holes and a 1/2 hole that goes all the way through so more weld repair to do.
With the nice Photobucket change I will be posting my photo's on the Facebook page I have for the mutt for now.
There were only a couple hidden gems found after the sand blast. 1: Someone had taken a grinder to the side of the hood where the hood numbers normally go. This was more than likely done by the army as the area had good military paint. This left nice grinder marks and for some reason what looks like a hole that had been repaired.
2: Cancer on the passenger front motor mount the cancer is about 6 inches or more above the mount. some little pin holes and a 1/2 hole that goes all the way through so more weld repair to do.
With the nice Photobucket change I will be posting my photo's on the Facebook page I have for the mutt for now.
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
It has been over a year since I posted on here manly do to the photo bucket issue but I have read the new way to post picture so here are some of the lastest photo's of Kermit along with its first show at Wings over Houston. I still have more to finish along with the camo paint job.
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
Re: New to me m151a2
Looks GREAT and worth the wait! Very nice.
Re: New to me m151a2
Looks really nice. Isn't it fun what a year can do?
I was wondering if the four capped holes in the rear floorboard were there to mount ??? At first I thought maybe an M4 mount, but I didn't see any matching holes between the front seats where the pedestal riser mount holes would have been.
I was wondering if the four capped holes in the rear floorboard were there to mount ??? At first I thought maybe an M4 mount, but I didn't see any matching holes between the front seats where the pedestal riser mount holes would have been.
Jim Peterson
SGM, 31B Retired 2015
1961 M151 -Sold
1974 M151A2, Working It!
SGM, 31B Retired 2015
1961 M151 -Sold
1974 M151A2, Working It!
Re: New to me m151a2
Very nice. Towing it though, you want that heavy weight in the front of trailer.
Does that Huey fly ?
Does that Huey fly ?
Re: New to me m151a2
I would bet the trailer is at least 7-10% nose heavy, Mutt is centered on axles but entire trailer is all the way forward so basically the nose of the trailer will be as heavy as the 416 trailer.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: New to me m151a2
Holes in floorboard are undercoating holes and plugs that were put there when the mutt was undercoated. They will also be in several places in the front of the cowl. There is actually a manual for the job.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
Thanks for the comments.
No MG mount holes in the body just the undercoating holes is what you are seeing. Only thing added to this mutt from what it came with from the GOV. is the extra mirror and side marker light kit which were done for driving on Houston roads.
As far as the set up for hauling on the trailer goes I have loaded my MB and MBT on the trailer this way many of times. This was the first time loading a M416 and Mutt like this on the trailer. The 416 is loaded with camping gear so its heavier than a empty trailer. The rear wheel of the mutt sits at the start of the dove tail an there is probably a little more tongue weight than needed but trailer rides nice and level. All in all pulls very stable at Texas highway speeds. I dream of a 24 foot trailer one day but for now I am happy with the set up.
No MG mount holes in the body just the undercoating holes is what you are seeing. Only thing added to this mutt from what it came with from the GOV. is the extra mirror and side marker light kit which were done for driving on Houston roads.
As far as the set up for hauling on the trailer goes I have loaded my MB and MBT on the trailer this way many of times. This was the first time loading a M416 and Mutt like this on the trailer. The 416 is loaded with camping gear so its heavier than a empty trailer. The rear wheel of the mutt sits at the start of the dove tail an there is probably a little more tongue weight than needed but trailer rides nice and level. All in all pulls very stable at Texas highway speeds. I dream of a 24 foot trailer one day but for now I am happy with the set up.
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
-
- Sergeant
- Posts: 69
- Joined: April 6th, 2016, 9:28 am
Re: New to me m151a2
No the Huey is only static but the Museums HH-46 and Loach are up and flying now and then.acudanut wrote:Very nice. Towing it though, you want that heavy weight in the front of trailer.
Does that Huey fly ?
https://www.facebook.com/National-Unite ... 833190413/
CSM In the Texas State Guard
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
National United States Armed Forces Museum
1943 MB W/Trailer "Puddle Jumper II"
1968 m274A5 "Little S.N.A.F.U"
1976 M151a2 "Kermit"
-
- Staff Sergeant
- Posts: 128
- Joined: September 7th, 2016, 11:21 pm
- Location: Pinche Texas
Re: New to me m151a2
I looked the MUTT over pretty good at Ellington during the show..... great job overall on the restoration.