WTB A2 windshield lower hinges

Need something for your Mutt? Let us know!

Moderators: rickf, raymond, Mr. Recovery

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: WTB A2 windshield lower hinges

Unread post by rickf » February 4th, 2019, 11:06 pm

Did not get a chance to look, I had a trailer that had to be drug (literally) out of the back of my property and the ground has to be frozen. With the temps going from 2 degrees up to 55 degrees in one day I had to act fast and get it out of there while things were still frozen. Today, well, I just flat out took a break and gathered up a bunch of guns and went to the range. :roll: Sorry, cabin fever took over. and on top of that my containers are in the back yard and the change from polar to mid spring has turned everything to MUD! As soon as things settle down a bit and I can get out there and be able to take stuff out of the container without losing it in the mud I will.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: WTB A2 windshield lower hinges

Unread post by rickf » February 5th, 2019, 9:03 pm

I dug around in the one container today but I could not find them. I now I have them but it is going to take some time to find them. I need to completely empty out a couple containers and reorganize things but I need a week of decent weather to do that. I can do cold but not frigid cold. And I need some of the mud to firm up or dry out!
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

Husker
Master Sergeant
Master Sergeant
Posts: 374
Joined: August 26th, 2016, 1:52 pm
Location: Fairfax Virginia

Re: WTB A2 windshield lower hinges

Unread post by Husker » February 5th, 2019, 9:50 pm

Thanks for trying rick!

I’m now also looking for the bushing that goes on the break pedal to the master cylinder if that is an important part. I only have 1 of the 2 bushings
US Army Fort Belvoir

19XX M35 something. Sold......
1972 M151A2
1967 M416
On the hunt for an M1031

Fil Bonica
Brigadier General
Brigadier General
Posts: 2607
Joined: December 9th, 2007, 10:49 am
Location: ~ Heaven ~

Re: WTB A2 windshield lower hinges

Unread post by Fil Bonica » February 5th, 2019, 10:45 pm

I have 1, NOS lower hinge .
If you want it pm me .

Fil Bonica
K1ABW

User avatar
Vzike
Sergeant Major of the "G"
Sergeant Major of the "G"
Posts: 729
Joined: December 27th, 2013, 4:05 pm
Location: Jupiter, Florida

Re: WTB A2 windshield lower hinges

Unread post by Vzike » February 13th, 2019, 12:05 pm

rickf wrote:Didn't make it to 0, it is 2 degrees with a minus 12 wind chill. Sorry but I ain't going out looking in containers today! :roll:
You must have been tired, Rick. I went to mine several times this week, and it's cold here! I had to wear a long sleeve shirt once!!!! :twisted: :twisted: :twisted:

User avatar
TFischer
Private First Class
Private First Class
Posts: 24
Joined: January 7th, 2021, 4:48 pm

Re: WTB A2 windshield lower hinges

Unread post by TFischer » January 17th, 2021, 10:11 am

i was just about to post a fresh question about windshield hinges however after using the search bar i found what i was looking for here. my question was is there a difference in the windshield hinges at the cowl in the a1 vs. the a2.
Ted
1968 M151A1

Mark
Brigadier General
Brigadier General
Posts: 2085
Joined: September 19th, 2009, 11:33 pm
Location: South Dakota

Re: WTB A2 windshield lower hinges

Unread post by Mark » January 17th, 2021, 2:41 pm

Yes, M151A2--upper hinge 11644912
lower hinge 11644887
M151, A1 --upper hinge 7331196
lower hinge 8754846
No mix-n-matching
mark


1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416

Post Reply