Would like to purchase a wave washer that mounts on the transfer shift lever pivot on the side of the transmission.
Thanks
Mark
Transfer Shifter Wave Washer
Moderators: rickf, raymond, Mr. Recovery
- m38inmaine
- Staff Sergeant
- Posts: 153
- Joined: August 28th, 2019, 4:22 am
Transfer Shifter Wave Washer
12B
Combat Engineer
Combat Engineer
Re: Transfer Shifter Wave Washer
You know it's highly likely that you can get a washer like that through most dedicated fastener suppliers. They aren't exactly unicorns. Get your dimensions and Google-search 'spring washer' and you can get one online.
Cheers,
TJ
Cheers,
TJ
-
- Sergeant First Class
- Posts: 299
- Joined: October 1st, 2015, 2:31 pm
- Location: Upstate SC
Re: Transfer Shifter Wave Washer
45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724
Re: Transfer Shifter Wave Washer
Have one but dash has over 60,000 miles and no telling how many was with this one before I pulled it off. Not much spring left to it at all.
ID ranges from .75 to .78in. most measurements are .77" (course it's close to being flat now)
OD is 1"
Thickness is .02"
ID ranges from .75 to .78in. most measurements are .77" (course it's close to being flat now)
OD is 1"
Thickness is .02"
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
- m38inmaine
- Staff Sergeant
- Posts: 153
- Joined: August 28th, 2019, 4:22 am
Re: Transfer Shifter Wave Washer
Thank you for the replies, have one on the way.
12B
Combat Engineer
Combat Engineer