Transfer Shifter Wave Washer

Need something for your Mutt? Let us know!

Moderators: rickf, raymond, Mr. Recovery

Post Reply
User avatar
m38inmaine
Staff Sergeant
Staff Sergeant
Posts: 145
Joined: August 28th, 2019, 4:22 am

Transfer Shifter Wave Washer

Unread post by m38inmaine » April 23rd, 2020, 7:29 pm

Would like to purchase a wave washer that mounts on the transfer shift lever pivot on the side of the transmission.

Thanks

Mark
12B
Combat Engineer

User avatar
m3a1
Lt. General
Lt. General
Posts: 4029
Joined: August 7th, 2014, 6:36 pm

Re: Transfer Shifter Wave Washer

Unread post by m3a1 » April 24th, 2020, 12:01 am

You know it's highly likely that you can get a washer like that through most dedicated fastener suppliers. They aren't exactly unicorns. Get your dimensions and Google-search 'spring washer' and you can get one online.

Cheers,
TJ

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 299
Joined: October 1st, 2015, 2:31 pm
Location: Upstate SC

Re: Transfer Shifter Wave Washer

Unread post by SturmTyger380 » April 24th, 2020, 1:54 pm

45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

User avatar
Surveyor
Terminal
Posts: 1092
Joined: November 13th, 2015, 3:56 pm
Location: Cajun Country

Re: Transfer Shifter Wave Washer

Unread post by Surveyor » April 24th, 2020, 8:03 pm

Have one but dash has over 60,000 miles and no telling how many was with this one before I pulled it off. Not much spring left to it at all.

ID ranges from .75 to .78in. most measurements are .77" (course it's close to being flat now)
OD is 1"
Thickness is .02"
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image

User avatar
m38inmaine
Staff Sergeant
Staff Sergeant
Posts: 145
Joined: August 28th, 2019, 4:22 am

Re: Transfer Shifter Wave Washer

Unread post by m38inmaine » April 25th, 2020, 12:51 am

Thank you for the replies, have one on the way.
12B
Combat Engineer

Post Reply