Not so favorite picture

Unread post by **rickf** » February 20th, 2021, 9:33 am

I was talking to him on the phone and do you see the roof support sitting on the mutt roof? He told me that the fabric of the mutt roof is all that is holding that end of the structure up!!!!!! Those bows and windshield have to be screaming for mercy. Hambone, looking at that again you might want to get some lumber under that beam and take a little weight off of that mutt roof. Not a lot of movement, just a tiny bit of weight relief to save the windshield and associated bodywork.

Mark · Unread post by **Mark** » February 20th, 2021, 9:49 am

A SNOW RAKE

img]

Mark · Unread post by **Mark** » February 20th, 2021, 9:52 am

[img]https://i.postimg.cc/902TvWmm/Screen-Sh ... AM.png/img] now the pic didn't s

Mark · Unread post by **Mark** » February 20th, 2021, 9:57 am

A good reason to have ROPS on the mutt!!! LOL

Hambone · Unread post by **Hambone** » February 20th, 2021, 12:31 pm

m3a1 wrote: ↑
February 20th, 2021, 8:51 am
I think maybe it was the hanging plant that did Hambone in...

That or the Wren nest in the top.

Mark wrote: ↑
February 20th, 2021, 9:49 am
A SNOW RAKE

img]

Mark, I would have to drive 8 hrs north to find one of those.

Rick, I'm thinking of putting a ratchet strap on that corner post and lifting that beam an inch or two.

Hambone · Unread post by **Hambone** » February 20th, 2021, 12:40 pm

AND, I just hit my 2000th post, better listen to the General boys.

csmith · Unread post by **csmith** » February 20th, 2021, 1:42 pm

Damn, that's a bummer, hope insurance takes good care of you.

Unread post by **rickf** » February 20th, 2021, 3:49 pm

Hambone wrote: ↑
February 20th, 2021, 12:40 pm
AND, I just hit my 2000th post, better listen to the General boys.

Only 15,600 to go to catch up maggot!

m3a1 · Unread post by **m3a1** » February 20th, 2021, 5:18 pm

Do your build-back with a bit more pitch on that roof, Hambone.

Cheers,
TJ

Hambone · Unread post by **Hambone** » February 20th, 2021, 6:21 pm

I'm thinking something like this, my slab is 32'w x 48'l.

Jay Mallari · Unread post by **Jay Mallari** » February 20th, 2021, 6:46 pm

That collapsed roof reminded me of the time when the volcano (Mt Pinatubo) back home in the Philippines erupted in 1991.
Our city was covered in about 12 inches of volcanic sand and ash. On the morning after the eruption, it looked like it snowed but the only problem is, its gray and it won't melt

It took me and my cousin a week just to clear the roof.

Roofs with metal trusses collapsed compared to the ones made of timber.

Hambone · Unread post by **Hambone** » February 22nd, 2021, 8:55 pm

Built Ford tough!

IMG_3499 (1).jpeg

63573124373__51D33717-CB98-4EDE-92A9-1BBCF42ACB58.JPG

Unread post by **rickf** » February 23rd, 2021, 10:37 am

Buff it out and done! Now, what about the wife's car?

Hambone · Unread post by **Hambone** » February 23rd, 2021, 3:21 pm

Wifes car was totaled, $2600 damage to top of my truck.

Hambone · Unread post by **Hambone** » February 25th, 2021, 8:39 pm

Making a little progress, insurance man said I could send him a bill for tearing it down, he should have ask my labor rate,

plus I'm salvaging all the material, with just a little truss work, I will have another shed.

IMG_0884.JPG

Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture

Re: Not so favorite picture