Brake Cylinders

[m270mlrs2]

Good morning I am getting ready to have my brake system checked and the steel lines redone and my question is should I use new manufactured brake cylinders or NOS brake cylinders. I would rather use the NOS original ones since they were specifically made for the vehicle but any other input would be helpful. I have the M115a2 with the 2 different sized cylinders. Thanks again

[raymond]

Have you considered rebuilding your old brake cylinders?
You can do it with the cylinders mounted on the plate.
You will need 2 3/4" and 2 1" kits, a drill and a brake hone.
The kits contain 2 new rubbers, 2 pistons, and a spring.
Easy to do and there are plenty of videos if you have never done it before.

[muttguru]

Have you considered rebuilding your old brake cylinders?
You can do it with the cylinders mounted on the plate.
You will need 2 3/4" and 2 1" kits, a drill and a brake hone.
The kits contain 2 new rubbers, 2 pistons, and a spring.
Easy to do and there are plenty of videos if you have never done it before.

And according to my list of interchangeables, if you want to fit new parts:-
(Front & Rear): 3/4" (M151 and M151A1)
Bendix 33188
Carquest EW16535
NAPA UP16535
O'Reilly WC 16535 and WC 251660
Raybestos WC-16535
Wagner F16535

(Front): 1" (A2 Only)
NAPA UP 16534
O'Reilly WC 19237

REBUILD KIT- Brake Cylinders
1" - NAPA UP 106
3/4" - NAPA UP 127

If these details have changed, please let me know and I'll update the list.
Ken

[Fil Bonica]

If replacement is an option then I have a set of four.
Pm me for price.

Fil Bonica