Motor is Finally in!!
Moderators: rickf, raymond, Mr. Recovery
Motor is Finally in!!
Decided to go ahead and get the motor off the shop floor and in the A2. I'll just work around the motor. Block and head sent to local machine shop. Bored 0.020. Cam and crank were polished. motor build went fine. Test run on engine stand resulted in oil pressure of 45psi. Now to get the rest of it done. The body was covered in diamond plate and it spent two years on a rotisserie getting de-bubbafied. It's getting a 100-amp system for a GRC-106 install.
You do not have the required permissions to view the files attached to this post.
Re: Motor is Finally in!!
Looks great! One foot in front of the other.
Cheers,
TJ
Cheers,
TJ
-
lpcoating
- Brigadier General
- Posts: 2030
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: Motor is Finally in!!
Looks very nice.
Guy
Guy
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
-
csmith
- Brigadier General
- Posts: 2085
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: Motor is Finally in!!
Sweet!!!
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
Re: Motor is Finally in!!
Guy,
There are a boatload of your panels on this A2. Wouldn't have ever considered tackling it if they hadn't been available.
Many thanks.
There are a boatload of your panels on this A2. Wouldn't have ever considered tackling it if they hadn't been available.
Many thanks.