Vehicle Cover

a place to discuss anything of interest to owners of M151 jeeps

Moderators: rickf, raymond, Mr. Recovery

Post Reply
jhd5787
civilian
Posts: 2
Joined: June 26th, 2014, 10:19 pm

Vehicle Cover

Unread post by jhd5787 » August 29th, 2014, 11:38 pm

Recently bought a mutt and unfortunately my living situation doesn't allow me to store it indoors. Does anyone have any suggestions for a vehicle cover? Need it to be waterproof. Thanks

User avatar
retiredpara
Master Sergeant
Master Sergeant
Posts: 373
Joined: September 5th, 2013, 12:19 pm
Location: SW MO... Come see Branson!

Re: Vehicle Cover

Unread post by retiredpara » August 30th, 2014, 2:22 pm

I guess it depends on your budget and how much humidity is in your area.
Most obvious is to put the bows and top on it with the doors. You can typically score a not very nice top and doors for not a lot of coin. It wont be parade pretty, but it will help keep your interior dry and free of debris.
You can google some nice tent type structures that car guys and rv guys use. Some are a bit pricey but you could work in it too.
Then there is the "carolina carports" type option. You see those signs all over the place.
I once built a nice shed from 100% recovered and free materials. Look for an old shed/barn in your area that an owner wants taken down, then haul to your place and build it however you want it.
If you are looking to tarp it, a used military tarp for the M113, M2 BFV, or M1 Abrams can sometimes be found reasonably.
If none of that works contact a local sign company, the highway billboard type, and see if they will sell you directly one of their used ones. I have done this before, they make great hay tarps.
If none of that, than try find an actual hay tarp. They are generally thicker and withstand weather better than the el cheapo blue tarp.
Would recommend keeping your tarp off of your jeep, so that air can flow around the vehicle. Also recommend parking it over plastic or vinyl, to reduce moist air coming up from the ground. Old bathroom shower panels if flat can work good for this. Yes I am a redneck at heart.
Keep all dirt, leaves, etc out of it. This will rust it quick.
HTH,
George

User avatar
whiterabbit
Command Sergeant Major
Command Sergeant Major
Posts: 672
Joined: October 6th, 2013, 4:20 pm
Location: Bristol Virginia

Re: Vehicle Cover

Unread post by whiterabbit » August 30th, 2014, 4:11 pm

They make all sorts of covers for jeeps.
Just make sure you get some air flow.
"It’s the unconquerable soul of man, not the nature of the weapon he uses, that insures victory." Gen. George Patton

1986-2014 Ordnance Corps RETIRED!
XVIII Airborne Corps Combat Affiliation
Go Ordnance!
1972 M151A2
1978 exMOD 109 Land Rover S3 (sold)
1942 WLA
M274 (sold) Big mistake. Sigh....

ccdoran
Private First Class
Private First Class
Posts: 13
Joined: September 12th, 2022, 11:52 pm

Re: Vehicle Cover

Unread post by ccdoran » September 27th, 2022, 6:12 pm

Hi all, I know this is an old post, but I am looking for some ideas to cover my Mutt. I know what to do for the winter, but I am looking for an idea for a cover for the summer and warmer weather whern I'll still be driving it. Like some way to have it covered but easily accessable. I can always wrap a tarp around it, but I thought I'd see what else all y'all have come up with.

Thanks! Chris
41 GP
41 MB
42 GPW
42 T-3
74 M151

User avatar
rickf
General
General
Posts: 19761
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Vehicle Cover

Unread post by rickf » September 27th, 2022, 8:23 pm

Look at lightweight covers for CJ-5's, If I remember correctly they are pretty close to the same length. If not then CJ-7 or early 90's wrangler.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

Hambone
Brigadier General
Brigadier General
Posts: 2506
Joined: October 1st, 2010, 12:19 am
Location: El Dorado, Arkansas

Re: Vehicle Cover

Unread post by Hambone » September 27th, 2022, 9:15 pm

I think this one was for a jeep yj, it was cheap, think I got it off Ebay, keeps the dust off, don't know how long it would last in the elements, this one is 2 years old and holding up well.
IMG_0963 (1).JPG
You do not have the required permissions to view the files attached to this post.

User avatar
m3a1
Lt. General
Lt. General
Posts: 4038
Joined: August 7th, 2014, 6:36 pm

Re: Vehicle Cover

Unread post by m3a1 » September 28th, 2022, 3:27 pm

I have a few covers made by KUVERALLS but I suspect they are limited to golf cart covers (which also do very well to cover fork lifts, by the way). They make an excellent product and the material they use is "600 Denier Polyester - Strong, Fast-Drying, Mold & Mildew Resistant." I will say that their claims are true because the covers I have wear like iron, don't seem to be the least bit prone to rot or mold or mildew and they have the very important vents sewn into the upper corners (lets the humidity that might be trapped under the cover, OUT). So if you end up shopping for a cover for a Jeep (which seems sensible to me) you should certainly look for a product out of 600 Denier Polyester, with vents (or at least one vent).

As to the matter of the usual problem with aftermarket covers, such as sagging and water being trapped, and if you have no correct canvas to support your cover, consider using ratchet straps; cheap ones that are narrow so that they can be laced through footman loops. They do a terrific job supporting covers. If you really wanna cover ALL the bases you can get some of that poly construction fence (bright orange plastic with big square holes). Weave your straps through the material and you'll end up with some excellent support for your cover in all the right places. It looks totally bubba but it works.

Then there's my all time favorite....used trampoline 'canvas'. That stuff is unbelievable but you gotta be johnny-on-the-spot to get it.

Bottom line is...use your imagination.

Cheers,
TJ

csmith
Brigadier General
Brigadier General
Posts: 2085
Joined: July 20th, 2009, 11:49 pm
Location: Va. Beach & NC Outer Banks

Re: Vehicle Cover

Unread post by csmith » September 29th, 2022, 5:10 pm

You could use a used bill board vinyl as mentioned, large, thick, relatively inexpensive. Just internet search, here is one of many

https://www.repurposedmaterialsinc.com/ ... rd-vinyls/
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!

User avatar
rickf
General
General
Posts: 19761
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Vehicle Cover

Unread post by rickf » September 29th, 2022, 8:31 pm

That vinyl will hold moisture in something terrible. In changes of temperature it will also sweat underneath and soak the inside of the vehicle and then keep it wet because it does not breath. Plastic tarps will do the same thing. If you use them just cover the top surface loosely but not the sides so air can move under it.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

ccdoran
Private First Class
Private First Class
Posts: 13
Joined: September 12th, 2022, 11:52 pm

Re: Vehicle Cover

Unread post by ccdoran » October 9th, 2022, 9:29 pm

You Guys are all awesome! Thanks for the help! When I get whatever I get Ill let you know how it works.

Chris
41 GP
41 MB
42 GPW
42 T-3
74 M151

Mark
Brigadier General
Brigadier General
Posts: 2091
Joined: September 19th, 2009, 11:33 pm
Location: South Dakota

Re: Vehicle Cover

Unread post by Mark » October 10th, 2022, 12:19 am

I used a canvas tarp, from farm supplies type place
mark


1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416

Post Reply