Spare parts in Europe ?

Andrew · Unread post by **Andrew** » April 7th, 2021, 12:52 pm

Question mainly for EU enthusiasts of MUTTs.
Germany, NL, etc...Where do you buy a spare parts in your countries?
I need to buy two parts, not any shop has both together.
Sorry to bore all readers of this forum - I tried to use Private message to contact Horst in DE
but without success.

Horst · Unread post by **Horst** » April 7th, 2021, 4:07 pm

Andrew, I did not get any PM from you yet...

I use various sources, I can confirm that there is no single one providing everything, specifically if you want to avoid lower quality repro parts. You will need to cherry pick and accept the additional shipping cost.

I have used with success:
Kemper Parts in Germany (good selection, be careful with repro)
Globeworks in Germany (same comment as with Kemper)
Truckparts Trading in NL (good selection but a lot of parts are out of stock, high minimum order amount)
Reomie in NL (used mainly when I had my M35s)
Ava Parts in CZ (smaller selection but mostly NOS, extremely high shipping cost outside of CZ)

rupert's · Unread post by **rupert's** » April 7th, 2021, 6:30 pm

I add other web pages in which I have bought successfully.

us-army-military-shop.de (I think it has higher prices than other websites)
m151bodypanels.eu (for body parts, they also have other parts in a pdf file)
mil-plus.com (Italy)
Greetings and good luck

Cisco82 · Unread post by **Cisco82** » April 9th, 2021, 2:54 pm

For your information Perini (Riva del garda Italy) sold his activity , the new owner is https://www.muttmania.it/

Horst · Unread post by **Horst** » April 10th, 2021, 1:52 am

Let’s hope he will be more honest than Perini.

Cisco82 · Unread post by **Cisco82** » April 10th, 2021, 6:58 am

I wasnt used to buy from perini since i prefer nos replacements but for used spare part his praice was pretty fair and the shipping is cheap ... for sure it wasnt my favourite vendor

svramselaar · Unread post by **svramselaar** » April 10th, 2021, 8:15 am

hi

reomie has stopt the owner is deceased all parts gone
his son or cousin is the owner of red river he has taken parts to the US
ava parts has also several from reomie wen i was at reomie

george

Andrew · Unread post by **Andrew** » April 10th, 2021, 1:52 pm

ok, gents, thank you for your comments.

Currently I'm using Czech supplier - AVA parts. Good experience, but limited offer.
After some search of EU suppliers I choose US company TNJ Murray.
Wide offer and nice prices (of course transportation cost).
Since 3th of April I'm still waiting for ANY responce from them.

Question - do you have any experience with delivery from US?
Is there any DUTY + VAT charge within EU? Value of goods is 300 USD.

svramselaar · Unread post by **svramselaar** » April 12th, 2021, 4:20 pm

Hi

You have to look at Your country customs
You can see there the amount to pay
Normaly you pay
Customs handling
Import tax
Vat

Transport from the US is expensive

George

lpcoating · Unread post by **lpcoating** » April 13th, 2021, 8:00 am

Hello Andrew. I'd recommend you talk to Richard about parts, importing, etc.

Also, you said that you have not had a response from TNJ. I know there are times when I get e-mails from outside of the US and they get caught in our Spam folder. You might want to try again or call them. Just a thought.

Guy

Andrew · Unread post by **Andrew** » April 14th, 2021, 9:22 am

summary of spare part searching in US (and EU).

TNJ Murray in US responded within couple of days - they are fine guyes.
Unfortunately I had to cancel my order (such a shame!) because of BANK TRANSFER FEE.

I tried to count everything including transport, duty, VAT. A lot of money, but fair enough.
But during a money transfer, my bank provider asked me for another 25 USD as a fee.
I was a LIITLE BIT UPSET and cut of transaction. (I'm not using a PayPal.)

Well, and this is the end of my parts searching.
Some parts ordered from DE, the rest of parts ordered in CZ - and it's DONE !

rupert's · Unread post by **rupert's** » April 14th, 2021, 3:35 pm

Yes...
It happened to me similarly, I tried to import from the US and the VAT cost and Customs was so high that I rejected the order ... it was better for me to lose the shipping money and buy it in Europe because the customs expense was very high.
I have bought in the US only through ebay, when you specify the guaranteed final cost, so you are sure that there are no surprises.
All the best

dr. trinkmann · Unread post by **dr. trinkmann** » September 13th, 2022, 10:23 am

It seems that Perini is back in business again, since his business successors didn't act the way he wished.
I've met him this summer in Limone/Italia and he told me, that he returned all the parts (about 500m³) back from Rovereto to Riva.
His daugther will now do the main of the business but he is still active, too.
Over the years i've bought a lot of his parts, all picked up in Riva everytime i was on vacation.
His parts are generally used (extracted from cutted vehicles, mostely from Germany) and it's better to pick your prefered part personally from his stock.
I'll try to continue buying from him as with his daugther the prices will raise strongly...

Spare parts in Europe ?

Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?

Re: Spare parts in Europe - summary

Re: Spare parts in Europe ?

Re: Spare parts in Europe ?