Hobbs Hour Meter
Moderators: rickf, raymond, Mr. Recovery
Hobbs Hour Meter
I suppose the best place to connect it would be the load wire from off/on switch or one of the feed wires going to one of the operation gauges.Aw, probably access to is the determining factor.
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Hobbs Hour Meter
You could tap into the #27 circuit at that fuse behind the dash. That circuit is the ignition circuit and is only hot when the switch is on. Also that puts you right at the dash where I assume you want to mount the gauge.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- svramselaar
- Major
- Posts: 1109
- Joined: December 30th, 2007, 6:48 am
- Location: holland
Re: Hobbs Hour Meter
Hi
You want to know the running hours
Take the positieve from a gauge at the dasch
George
You want to know the running hours
Take the positieve from a gauge at the dasch
George
Re: Hobbs Hour Meter
Thanks be to you all for the feedback
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416