WTB: M416A1 hose assembly

need more space? add a M416 trailer! and discuss it here.

Moderators: rickf, moose53, Mr. Recovery, raymond

Post Reply
richard
Sergeant Major
Sergeant Major
Posts: 592
Joined: August 10th, 2011, 5:52 am
Location: Lower Saxony, Germany

WTB: M416A1 hose assembly

Post by richard » June 29th, 2016, 7:28 pm

I restored my M416A1 and everything is done with one exception: bleeding the hydraulic brake system. We recognized that the hose does not let through the fluid. All other lines, the wheel cylinders and the main brake cylinder are working.

Now I am looking for the item #14 as shown in figure 9 of the TM 14&P manual. It is having the P/N 11625495. http://g838.org/g838_manuals/manual-m416.pdf

I searched on the Internet with no luck. Does someone know a source for it? Or is someone having a used one for a fair price?
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu

1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 254
Joined: October 1st, 2015, 2:31 pm

Re: WTB: M416A1 hose assembly

Post by SturmTyger380 » June 30th, 2016, 9:23 am

That looks like a typical hydraulic brake line. Do you have a company near you that might do the work of creating hydraulic hoses? Maybe for equipment like a tractor here in the States?

We have places like that here and you can take your hose with you and they will fashion a new one based on your sample. It costs more than if you could find one at a parts store but when you are looking for something that does not exist then you have to have special work done.

Alan
45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

richard
Sergeant Major
Sergeant Major
Posts: 592
Joined: August 10th, 2011, 5:52 am
Location: Lower Saxony, Germany

Re: WTB: M416A1 hose assembly

Post by richard » June 30th, 2016, 3:54 pm

Hi Alan,

Yes, we have a store here but they do not make the brake line hoses anymore for vintage vehicles because of modern laws and rules and certificates and so on. Next problem is the difference between your country and ours. We are metric. :mrgreen: I would like to stay on UNC and UNF and not to convert anything to our metric world.

THX
Richard
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu

1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter

Mr. Recovery
Brigadier General
Brigadier General
Posts: 2483
Joined: December 5th, 2007, 9:03 pm
Location: New Port Richey, Fl.
Contact:

Re: WTB: M416A1 hose assembly

Post by Mr. Recovery » June 30th, 2016, 8:13 pm

richard wrote:Hi Alan,

Yes, we have a store here but they do not make the brake line hoses anymore for vintage vehicles because of modern laws and rules and certificates and so on. Next problem is the difference between your country and ours. We are metric. :mrgreen: I would like to stay on UNC and UNF and not to convert anything to our metric world.

THX
Richard
Richard, you can send me the hose and I'll be happy to have one made for you and send it back.

Image
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
Image

Post Reply