Regulator for Leece-Neuville generator

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
User avatar
richard
Command Sergeant Major
Command Sergeant Major
Posts: 621
Joined: August 10th, 2011, 5:52 am
Location: Lower Saxony, Germany
Contact:

Regulator for Leece-Neuville generator

Unread post by richard » May 19th, 2024, 6:03 pm

Hi folks,

I have here a Leece-Neuville generator here. Now I am looking for the correct regulator. It has the NSN 2920-00-928-6144. Is there any source for it? I already contacted George from AJP but he has none.

Any hints would be very appreciated.

Richard
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu

1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter

User avatar
rickf
General
General
Posts: 19927
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Regulator for Leece-Neuville generator

Unread post by rickf » May 19th, 2024, 8:43 pm

If this is one of the military 24 volt generators then you need to contact Southern Automotive. They are the ones that put these together. If this is the one with the regulator in the center section then you may be out of luck, they were only made for one year and Southern has no plans to make repair parts.

https://www.southernautomotive.com/catalog/index.php/
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

User avatar
svramselaar
Major
Major
Posts: 1118
Joined: December 30th, 2007, 6:48 am
Location: holland

Re: Regulator for Leece-Neuville generator

Unread post by svramselaar » May 20th, 2024, 5:28 am


Post Reply