service stand
Moderators: rickf, raymond, Mr. Recovery
service stand
Hi I bought a 1972 151A2 about 3 months ago and have bought the manuals and some thing I needed like belts and hoses as mine were in bad shape . My 151 runs pretty well I removed the Rops as I didnt like them, I was very carefull to remove them without cutting anything. I checked all the lubricant levels and greased the hell out of it and plan to enjoy it this summer and do some cosmetic like welding up the ROP holes and some other extraneous holes this winter, the metal is in good shape with nothing but a little surface rust here and there. I also want to take the wheels apart check the brakes and lube all the bearings amongst some other maintanence. I have been looking on the web and picking up all the information and tips I can. I was on a site called Daves flightline-my M151A2 1/4 ton MV, on the page there is a section called muts in action. That section is pictures of Muts, there is a very interesting picture of a device called a service stand the pictures were credited to TNJ Murrey the parts supplier. Does anyone have pictues that show how this devive functioned? It lifted the 151 up and than it could be rotated to gain prety easey acces to all the underneath. I am looking for pictures that would help me get a better idea of how this thing funtioned and where the lift points on the 151 attached to the stand. It looks like it was made out of about 1.50 inch pipe. If I can get enough picturs of how it works I was thinking about building one. Thanks Al
Re: service stand
check in with rickf, in the 151 sale area--i think he has what you are looking for.
Re: service stand
the general name they are known by is rotisserie... RickF has one for sale right now in the for sale section.
If that doesn't interest you google auto rotisserie and you'll find where a number of people have posted plans on how to build your own...
Jim
If that doesn't interest you google auto rotisserie and you'll find where a number of people have posted plans on how to build your own...
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
-
- Brigadier General
- Posts: 2086
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: service stand
Welcome Al. If you can't find out about it regarding a 151 here it does not exist!
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
Re: service stand
Welcome aboard !!! Seabee
1971 M151A2 MUTT , M416 trailer
NMCB 62, Delta Co.,BU2, Gulfport, MS Home Port
VFW 3838, American Legion 63
Seabee Association of America LM , NMCB 62 Assoc.
"Performance Under Fire" US Navy Seabees '69-'72
National Assoc. of Atomic Veterans/ Amchitka
SEMO University Vet Corp Alumni
MVPA#32091
NMCB 62, Delta Co.,BU2, Gulfport, MS Home Port
VFW 3838, American Legion 63
Seabee Association of America LM , NMCB 62 Assoc.
"Performance Under Fire" US Navy Seabees '69-'72
National Assoc. of Atomic Veterans/ Amchitka
SEMO University Vet Corp Alumni
MVPA#32091
Re: service stand
smlemk111 wrote:Hi I bought a 1972 151A2 about 3 months ago and have bought the manuals and some thing I needed like belts and hoses as mine were in bad shape . My 151 runs pretty well I removed the Rops as I didnt like them, I was very carefull to remove them without cutting anything. I checked all the lubricant levels and greased the hell out of it and plan to enjoy it this summer and do some cosmetic like welding up the ROP holes and some other extraneous holes this winter, the metal is in good shape with nothing but a little surface rust here and there. I also want to take the wheels apart check the brakes and lube all the bearings amongst some other maintanence. I have been looking on the web and picking up all the information and tips I can. I was on a site called Daves flightline-my M151A2 1/4 ton MV, on the page there is a section called muts in action. That section is pictures of Muts, there is a very interesting picture of a device called a service stand the pictures were credited to TNJ Murrey the parts supplier. Does anyone have pictues that show how this devive functioned? It lifted the 151 up and than it could be rotated to gain prety easey acces to all the underneath. I am looking for pictures that would help me get a better idea of how this thing funtioned and where the lift points on the 151 attached to the stand. It looks like it was made out of about 1.50 inch pipe. If I can get enough picturs of how it works I was thinking about building one. Thanks Al
I do have one for sale.
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: service stand
Hi thanks for the education, I have not been into vehicles before and so had never seen a rotisserie. I had read Ricks add but thought that he was selling some kind of BBQ that the services used. Unfortunatly I live in Oregon and the shipping from the east coast would be cost prohibitive. I had a brief look at the web for rotiseries and there are lots of interesting sites with prints for rotisseries. I thank you all for the come back and appereciate that there are lots of people who will help me on my new hobby. I intend to keep the 151 full military with a camo paint job. Thanks again Al
Re: service stand
Rickf also uses it for BBQ !!!! Big cows !!!! Seabee
1971 M151A2 MUTT , M416 trailer
NMCB 62, Delta Co.,BU2, Gulfport, MS Home Port
VFW 3838, American Legion 63
Seabee Association of America LM , NMCB 62 Assoc.
"Performance Under Fire" US Navy Seabees '69-'72
National Assoc. of Atomic Veterans/ Amchitka
SEMO University Vet Corp Alumni
MVPA#32091
NMCB 62, Delta Co.,BU2, Gulfport, MS Home Port
VFW 3838, American Legion 63
Seabee Association of America LM , NMCB 62 Assoc.
"Performance Under Fire" US Navy Seabees '69-'72
National Assoc. of Atomic Veterans/ Amchitka
SEMO University Vet Corp Alumni
MVPA#32091
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: service stand
Yummy. Reminds me of roast beef back home.
![Image](http://farm1.static.flickr.com/219/462799200_2be7f34506.jpg)
![Image](http://farm1.static.flickr.com/219/462799200_2be7f34506.jpg)
- Mr. Recovery
- Brigadier General
- Posts: 2901
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: service stand
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Image](http://i195.photobucket.com/albums/z96/Mr_Recovery/for%20sale%20n%20email/Pukinpumkin.jpg)
![Image](http://i195.photobucket.com/albums/z96/Mr_Recovery/dan-2beers.jpg)
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
Re: service stand
I thought it looked like a lion on that spit ![Shocked :shock:](./images/smilies/icon_eek.gif)
![Image](http://i146.photobucket.com/albums/r251/oviguy/1341.jpg)
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Image](http://i146.photobucket.com/albums/r251/oviguy/1341.jpg)
Last edited by Rainman on June 23rd, 2010, 10:38 pm, edited 1 time in total.
M151 World Land Speed Record Holder
-
- Colonel
- Posts: 1654
- Joined: November 26th, 2007, 7:44 am
- Location: ~Heaven~
Re: service stand
There is more than one way to get under a MUTT:
![Image](http://i589.photobucket.com/albums/ss337/WorldCommander/Rotisserie.jpg)
![Image](http://i589.photobucket.com/albums/ss337/WorldCommander/Carlift.jpg)
![Image](http://i589.photobucket.com/albums/ss337/WorldCommander/Rotisserie.jpg)
![Image](http://i589.photobucket.com/albums/ss337/WorldCommander/Carlift.jpg)
Ralph
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
- raymond
- Major General
- Posts: 3430
- Joined: November 26th, 2007, 8:29 pm
- Location: God's country, Clarksville Mo.
Re: service stand
If you buy one very far away, remember that they weigh quite a bit. Mr.Recovery hauled one across the U.S. a couple years ago. He said it weighed about 2 miles per gallon.
Raymond
"On the day when crime puts on the apparel of innocence, through a curious reversal peculiar to our age, it is innocence that is called on to justify itself." Albert Camus
"On the day when crime puts on the apparel of innocence, through a curious reversal peculiar to our age, it is innocence that is called on to justify itself." Albert Camus
Re: M151 rotisserie stand
I have a rotisserie especially adapted for the M151, I can't rebuild jeeps anymore.
I paid $1499 a year ago, will sell for $900.
Dan Dickson
MUTT Rescue
Wimberley, Texas
Dandeejet@yahoo.com
512 775-8939
I paid $1499 a year ago, will sell for $900.
Dan Dickson
MUTT Rescue
Wimberley, Texas
Dandeejet@yahoo.com
512 775-8939