.030 ring kit NSN
Moderators: rickf, raymond, Mr. Recovery
.030 ring kit NSN
As some of you may, or may not know, I'mm rebuilding the motor in my MUTT. I have .030 oversize pistons but no rings.
According to my 34P (1988) the part number for the ring set, piston.030 oversize is 5702224 the NSN cross refrences to 2805-00-036-0286.
Is that the correct NSN? I ask because a parts supplier tells me that that is the .010 oversize set, he has the 1978 -34P. Would any of you confirm or deny any of the above. Thanks
Chris
Don't flame me for not buying a take out motor, as I am too anal to leave it alone and not tear into that one.
According to my 34P (1988) the part number for the ring set, piston.030 oversize is 5702224 the NSN cross refrences to 2805-00-036-0286.
Is that the correct NSN? I ask because a parts supplier tells me that that is the .010 oversize set, he has the 1978 -34P. Would any of you confirm or deny any of the above. Thanks
Chris
Don't flame me for not buying a take out motor, as I am too anal to leave it alone and not tear into that one.
Last 2Δ Command Group NCOIC
Re: .030 ring kit NSN
Don't know who your parts supplier is but if he's using a -34P dated 78 and your using the same book dated 88 than you are correct. Might want to find a new supplier or a civilian cross reference.
Re: .030 ring kit NSN
I don't have access to my books right now but there should be no problem finding a set of rings in the aftermarket. The rings don't know what they are going in! All you need is the diameter and the thickness of the ring and the any special ring properties (none in your case). Any machine shop should be able to measure the pistons and get you a set.
Rick
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: .030 ring kit NSN
Rick,
My thoughts exactly, about any machine shop worth it's salt. I just wanted to take make it easier.
My dad always said, "Never let tackles think." I'm the QB in this game.
Chris
My thoughts exactly, about any machine shop worth it's salt. I just wanted to take make it easier.
My dad always said, "Never let tackles think." I'm the QB in this game.
Chris
Last 2Δ Command Group NCOIC
-
- Brigadier General
- Posts: 2068
- Joined: December 11th, 2007, 2:28 pm
Re: .030 ring kit NSN
I think I read somewhere the crossover ring is same as 57 chevy ,don't remember if it was a 6 or 8? I think this is on OTTERs' web site...MuttMotorpool....HTN...
slowest mutt east of the missippi..
Re: .030 ring kit NSN
where in the world do you find a machine shop nowadays?
Jim
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
- Mr. Recovery
- Brigadier General
- Posts: 2897
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: .030 ring kit NSN
A good one is hard to find nowdays! (? where have I heard that befor ) there is one in my area that I have used since the late 60's, he has moved to different locations over the years and is known as one of the top 5 in the local raceing circle, I have a block there now.
Dan.
Dan.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
Re: .030 ring kit NSN
Chris,
the 34P dated 15-Nov-1988 (Kits page 5) shows :-
Ring Set - .030 Oversize - P/N 5702224 NSN 2805-00-036-0286
Hope this helps.....
the 34P dated 15-Nov-1988 (Kits page 5) shows :-
Ring Set - .030 Oversize - P/N 5702224 NSN 2805-00-036-0286
Hope this helps.....
Kind regards....
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Re: .030 ring kit NSN
Ken, That's what I have (-34 and NSN). BTW Marcel told me about red river parts and they had th .030 pistons. Thanks
Chris
Chris
Last 2Δ Command Group NCOIC