M151A2 Restoration
Moderators: rickf, raymond, Mr. Recovery
-
- Brigadier General
- Posts: 2039
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: M151A2 Restoration
If it were mine I would not butt weld the inside. You've already welded the outside and the backer plate (yes, diamond) over the back side will be plenty. It's thin material, no need to over stress the grain structure...
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
Re: M151A2 Restoration
Ok your right I was not sure about that butt weld on the back. Guy Mr recovery pointed out that the passenger side has a bend in the frame but I cant see any on the drivers side would that be right?lpcoating wrote:If it were mine I would not butt weld the inside. You've already welded the outside and the backer plate (yes, diamond) over the back side will be plenty. It's thin material, no need to over stress the grain structure...
-
- Brigadier General
- Posts: 2039
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: M151A2 Restoration
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
Re: M151A2 Restoration
Great thanks Guy .My father said it must of been struck in the side ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- Brigadier General
- Posts: 2039
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: M151A2 Restoration
Looks like you could use your tranny cover for a reference...
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
Re: M151A2 Restoration
Yes your right if I bolt it in place I can use it as a guide right?lpcoating wrote:Looks like you could use your tranny cover for a reference...
Re: M151A2 Restoration
Guy have you had a chance to do some work of your own? I keep looking everyday for new updates.LOL
- Mr. Recovery
- Brigadier General
- Posts: 2901
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: M151A2 Restoration
The drivers side of mine has much less of a inward bend that is just behind where the steering box mounts, you almost can't see it unless it is turned upside down but, it almost looks to me that it "is" from ruff treatment after it was stripped and pushed around or from sitting on it's side.
![Image](http://i195.photobucket.com/albums/z96/Mr_Recovery/HOME-PC/Pictures/dan-2beers-2_zps6d3a82dc.jpg)
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Image](http://i195.photobucket.com/albums/z96/Mr_Recovery/HOME-PC/Pictures/dan-2beers-2_zps6d3a82dc.jpg)
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
-
- Brigadier General
- Posts: 2039
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: M151A2 Restoration
I've only been in the garage about an hour over the past several weeks. My wife had day surgery on her foot and is down and out for several weeks. I spent all last weekend helping her around the house, getting ice for her foot, etc. I'm not sure who has it worse, her or me!RCA827 wrote:Guy have you had a chance to do some work of your own? I keep looking everyday for new updates.LOL
![Shocked :shock:](./images/smilies/icon_eek.gif)
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
-
- Brigadier General
- Posts: 2039
- Joined: February 19th, 2013, 11:38 pm
- Location: Mansfield, PA
- Contact:
Re: M151A2 Restoration
M151 Body Panels - http://www.m151bodypanels.com/
'68 A1 - Under full resto
'68 A1 - Under full resto
Re: M151A2 Restoration
Oh I understand . ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: M151A2 Restoration
That is interesting, I never paid any attention to that. It looks like the whole drivetrain is offset.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Master Sergeant
- Posts: 348
- Joined: May 31st, 2008, 6:14 pm
- Location: Ottawa, Ontario, Canada
M151A2 Restoration
I noticed that as well when I was cutting myself some floor mats. Both sides quite different due to the that tunnel shape.
Sent from my iPhone using Tapatalk 2
Sent from my iPhone using Tapatalk 2
Scott Bentley
M151A2 CDN, SN 43813, CFR 74-09195
Gone but never forgotten: Sgt Shane Stachnik, Killed in Action on 3 Sept 2006, Panjwaii, Afghanistan
M151A2 CDN, SN 43813, CFR 74-09195
Gone but never forgotten: Sgt Shane Stachnik, Killed in Action on 3 Sept 2006, Panjwaii, Afghanistan
Re: M151A2 Restoration
Dan I have another cut front section for the drivers side frame here if you want it, no bend in it.Mr. Recovery wrote:The drivers side of mine has much less of a inward bend that is just behind where the steering box mounts, you almost can't see it unless it is turned upside down but, it almost looks to me that it "is" from ruff treatment after it was stripped and pushed around or from sitting on it's side.![]()
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Mr. Recovery
- Brigadier General
- Posts: 2901
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: M151A2 Restoration
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Image](http://i195.photobucket.com/albums/z96/Mr_Recovery/HOME-PC/Pictures/dan-2beers-2_zps6d3a82dc.jpg)
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's