I bought an AM-2060A and MT-1029 mount awhile back as a set. Everything is OK, so I tried to check out a spare AM-2060A and it does not fit. It won't slide in/seat all the way and is about a 1/8" or so below the MT-1029 mount. I thought maybe the MT-1029 mount has play, but it is a fixed plate. So anybody had a problem like this before? There isn't anything obstructing the AM-2060A or mount, it sits flush against each other, but when you try to seat it all the way, the keys and plug are off. It's not an NOS shelf queen, and it has been around and had some use in its military life.
Any suggestions would be helpful and thank you all in advance.
AM-2060A / MT-1029 Mounting issues
Moderators: rickf, raymond, Mr. Recovery
AM-2060A / MT-1029 Mounting issues
Field Artillery 1994-2015 - Retired!
Airborne 1994-1998
Air Defense Artillery (IHAWK) 1981-1993
1968 M151A1 with M416 Trailer
1960 M422A1 (needs restoration) with M416B1 Trailer
Airborne 1994-1998
Air Defense Artillery (IHAWK) 1981-1993
1968 M151A1 with M416 Trailer
1960 M422A1 (needs restoration) with M416B1 Trailer